If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
A white stearic acid amide oil emulsion. The product is environmentally friendly, safe, clean, and non-polluting. It can be used in paints, inks, and leather coatings.
Particle Size: D50: =2um
Stearic Acid Amide Emulsion
Stearic acid amide emulsion is white. It is safe, effective, environmentally-friendly, and not-polluting. The product can be easily dispersed in water, has low viscosity and is highly dispersible.
Stearamide may also be known as stearamide. Its chemical name is C17H35CONH2. Stearic acidamide amide is insoluble when dissolved in water. However, it can be slightly soluble at room temperatures in organic solvents. It is able to improve dispersion effects and the affinity of dyes.
Excellent adhesion and lubricity. No moisture absorption. You can mix it with paraffin wax. Ammonium salt is created by the reaction between stearic and ammonia. It then gets dehydrated to get the final product. It is a good, smooth product that has low hygroscopicity. Use it as a pigment ink mixed agent, surface-active and fiber oil agent.
As a sensitizer, slip agent or anti-blocking agent in thermal papers coatings and as an anti-blocking agent and slip agent in polyolefin films, stearamide is also useful. Stearates are made from fatty saturated monocarboxylic acid derivatives of natural vegetable oils.
Stearic Acid Amide Emulsion Properties:
Stearic Acid amide Emulsion (White) is an emulsion that is not toxic, polluting, or hazardous.
Technical data of Stearic Acid Amide Emulsion
Solid content.%
25±2
Viscosity,cps
≤250
Size for Particles D50
≤2um
6-9
How does Stearic Acid Amide Emulsion get made?
Insoluble in water, stearic Acid amide must be prepared using emulsifiers. The water-based stearic Acid amide Emulsion is still not able to disperse well even after adding an emulsifier or dispersant. Additionally, it can easily precipitate. Long-term storage may also cause flocculation and stratification. Additionally, high-speed stirring is required and grinding is done under heat to make the aqueous Stearic Acid amide Emulsion. The production process can be complicated.
First, add water-based water-basedstearic Acid amide to a bowl. Next stir for 30 minutes at 2500r/min. Then add defoamer (preservative) and continue stirring for another 40 minutes. This will produce the aqueous solution of stearic Acid amide. This prepared water-based, stearic-acid amide-amide emulsion contains 41.7% solids and has a viscosity (146 mPaS). The water-based, stearic-acid amide-amide emulsion can be centrifuged for 30 minutes at 20000r/min and is free from delamination. It was stored at 20 to 35°C for three (3) months.
Stearic Acid Amide Emulsion:
Stearamide can be used to lubricate and release molds for polyvinylchloride, polystyrene, and other plastics.
In order to act as an antiblocking agent on polyolefin film films, stearamide should be combined with oleamide-erucamide.
Stearamide, unlike the common inorganic anti-blocking agents (silica), does not affect the transparency. Stearamide is an internal release agent in synthetic rubber, natural rubber, and as a product glossifier.
The sensitizer of thermal paper is made from stearic Acid amide Ultrafine Aqueous Dispersion.
The ultra-fine, water-based, stearic Acid amide dispersion serves as textile waterproofing, fabric softener and antistatic agent. It also acts as a wetting agent.
Packing & Shipping for Stearic acid amide emulsion
You can choose from many kinds of packing depending on your stearic Acid amide Emulsion Quantity.
Packaging of Stearic Acidamide Emulsion: 25kg/barrel. Or as requested.
Shipping Stearic acidamide amide emulsion: could ship out by sea or by air as soon as payment receipt is received.
