If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Manganese carbonide is a stable, manganese-carbon alloy compound. Mn3C has the chemical formula and the melting point at about 1520degC. Its density is 6.89g/cm3.
Particle Size: -325mesh
Purity: 99%
About Manganese Carbide Mn3C Powder:
Manganese carbonide is an inert compound that’s made of manganese, carbon. Manganese carbide formula is Mn3C. Manganese carbide melting point at 1520 °C is Manganese, while Manganese absorption is 6.89g/cm3. Manganese carbide burns fast in oxygen. It then breaks down in water and produces manganese hydroxide (methane) and hydrogen. It can be easily decomposed by acid, easy reaction with fluorine and chlorine, and at high temperatures, decomposes into manganese, carbon, and methane.
The heat of the formation of manganese carbide is ^fHm (298K)=-(15.06±12.55)kJ/mol. The result of smelting manganese-silicon or high-carbon ferromangannese in an electric furnace or blast furnace is manganese carbide. This means that the heat absorbed is much lower than for reduction to metallic manganese and manganese silicide. The reaction is and at a low temperature. High-carbon ferromanganese has more carbon.
To receive the most current Manganese carbidepricing, please send us an inquiry.
Performance of Manganese Carbide Mn3C Powder:
Mn3C has the following physical characteristics: Mn3C is a hard crystalline solid, or bright needle crystal. Its relative density is 6.89. Concentrated sulfuric acid or nitric Acid will insulate it. However, water or dilute acids can decompose the metal to create manganese hydroxyide, hydrogen, and other hydrocarbons. It is easily reacted with fluorine or chlorine, and it burns fast in oxygen.
Technical Parameters of Manganese Carbide, Mn3C Powder:
Certificate Mn3C powder
Purity
C
P
S
O
Free carbon
Particel Size
>99%
5.91
0.03
0.03
0.3
0.2
D50=11μm, -325mesh
How is Manganese Carbide Mn3C Powder produced?
The gas-based reduction manganese oxide is a method of making manganese carbide. Once you have mixed manganese dioxide, water, binder, and dried, the dry block can be placed in a mixture containing H2, CMC, CO and N2. Then, it is calcined at 1100 1300, which is manganese carbide. Here are the specific steps. The mass percent of -325 mesh size refers to 90% analytically purified manganese dioxide, trimanganese troxide and mixed with 0.5% CMC. Finally, pelletization and drying take place. Once dried, the sample is placed in an atmosphere of 10% CMC, 30% H2, 10% CO, 50% N2 and at 1150°C for 120 minutes. Then, the sample will be calcined under an N2 atmosphere. After cooling down to room temperature the obtained manganese carbide product can be converted into manganese dioxide at 95%.
Applications forManganese Carbide mn3C Powder:
Manganese carbonide Mn3C powder can be used to make hard coatings, target, weld materials, and spray tools. It is also used in the steelmaking industry, aerospace, and many other areas.
The grain refiner of Cermet and Wolfen carbide, manganese carbonide has the ability to significantly enhance the alloy’s characteristics.
Manganese troxide is an important raw material in the manufacture of soft magnetic materials of manganese, zinc ferrite and other electronic materials. This is why it is so widely used.
To prepare transformer oils, you can use manganese carbonide. It is easy and can be made in large quantities. This will prolong the lifespan of your transformer oil, as well as reduce safety hazards.
Manganese Carbide Mn3C Pulp Storage:
Manganese Carbide, Mn3C Powder, should be maintained in a dry, cool, and sealed environment.
Packing & Shipping of Manganese Carbide Mn3C Powder:
You can pack it in two plastic bags with the inside.
Manganese Carbide Mn3C Powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Manganese Carbide, Mn3C Powder shipping: could ship out by sea or by air as soon as payment receipt is received.
Luoyang Tongrun Nano Technology Co. Ltd.
Send us an enquiry if you’re looking for Manganese Carbide Powder of high quality. (brad@ihpa.net)
