If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Introduction to Silicon Nitride si3N4 Powder Silicon nitride This is an inorganic compound, with the chemical formula Si3N4. The relative molecular mass of this substance is 140.28. Gray, white, or off-white.

Physicochemical properties of Silicon Nitride Si3N4 Pulp
Si3N4 has high-temperature insoluble properties. It exhibits high-temperature creep resistance. Hexagonal system. Crystals are hexagonal. The Si3N4 density obtained using the reaction sintering process is 1.8-2.7% g/cm3. While the Si3N4 density obtained via hot-pressing is 3.12-3.22g/cm3. Mohs hardness (99.5), Vickers hardness (2200) and microhardness (32220MPa) are all 99.5. The melting point of the metal is 1900 when it is under pressure. It typically decomposes around 1900 at atmospheric pressure. The heat specific capacity is 0.71J/g*K. The heat of forming is -751.57kJ/mol. The thermal conductivity of the material is (2-155) W/(m*K). The linear expansion coefficient is 2.8~3.2×10-6/(20~1000).
Water insoluble. Insoluble in water. The temperature at which oxygenation starts in the air is 1300-1400. The specific volume resistance of the air is 1.4×105 *m for 20 and 4×108*m for 500. The elastic modulus measures 2842046060MPa. Reaction sintering results in a compressive strength 490MPa. At 1285, it reacts to dicalcium diazide and forms calcium diazide. At 600, it is reduced to a transition metal and released nitrogen oxides. The bending strength of the silicon halide is 147MPa. It can be made by heating silica powder in nitrogen, or reacting with ammonia to make silicon halide. The resistance is between 1015-1016O.cm. It can be used in high-temperature ceramic materials.
Other than hydrofluoric acid or hot phosphoric acid silicon nitride doesn’t react with any inorganic acids. It also has high corrosion resistance.
Silicon Nitride Si3N4 Powder Properties
Other Names silica (IV), nitride
CAS No. 12033-89-5
Formula compound Si3N4
Molecular Weight 140.28
Appearance From white powder to gray powder
Melting Point 1900degC
Boiling Point N/A
Density 2.2-3.5g/cm3
Solubility of H2O Insoluble
Exact Mass 139.943
Silicon Nitride Si3N4 Powder CAS 12033-89-5

Silicon Nitride Si3N4 Pulverization
High thermal stability, high oxidation resistance and high dimensional accuracy are some of the benefits of silicon nitride clay material. The covalent compound silicon nitride has a high bond strength and will form an oxygen film in the atmosphere, which gives it excellent chemical stability. Silicon nitride can not be oxidized below 1200. A protective film can also be formed between 1200 and 1600 to stop further oxidation. Silicon nitride does not become infiltrated, or corroded from aluminum, lead or tin, silver or brass, or any other molten metals and alloys. However, it is susceptible to corrosion by magnesium and nickel-chromium alliance, as well as other molten liquids.
Silicon nitride ceramic materials are suitable for use in high-temperature engineering components , Advanced refractory for the metallurgical sector , Corrosive-resistant components Sealing components in the chemical, machining, and cutting industries.
Silicon nitride is able to form strong bonds with silicon carbide (alumina), thorium oxide, boron and boren nitride etc. It can also be used to modify different proportions.
Additionally, silicon nitride may be used in solar cells . After the silicon-nitride nitride is plated with the PECVD process, it can be used to reduce incident light reflections. In the deposition process for a silicon Nitride film, the hydrogen atom from the reaction product enters silicon nitride wafer and silicon nitride movie, serving as a passivation defect. The ratio of silicon nitrogen atoms to silicon nitride is not strictly 4:3. It fluctuates according to technological conditions. Different atomic proportions correspond to different physical characteristics of the film.
You can also use it in ultra-high temperatures gas turbines, plane engines, and electric furnaces , etc.

Main Supplier of Silicon Nitride Powder Si3N4
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super high-quality chemicals.
High-quality products are what you want Silica nitride Si3N4 granules Please feel free and contact us to send an inquiry. (brad@ihpa.net)

    By admin