If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

What is Aluminium Carbide? Aluminum carbide, an organic compound, has the molecular form Al4C3. Its molecular mass is 143.96. The powder is either a yellow-gray, green-gray, or powder and is hygroscopic. Hydrolysis in cold water to methane, decomposition at high temperatures and aluminum hydroxide.
What happens when aluminum carbonide reacts with water
Aluminum carbide has four carbon atoms in each aluminum atom, which gives it a tetrahedral structure. It is stable to 1400degC. It can be broken down in water, and it produces methane. From the above reactions, it is clear that aluminum carbide can be broken down in the water and formed methane.
What happens when aluminum reacts to carbon?
At high temperatures, aluminum reacts with carbon, nitrogen and sulfur to form the appropriate aluminum compounds. Aluminum carbide (Al4C3) is a form of pale yellow crystals. It can be heated by heating a mixture from these elements at higher temperatures than 1000degC.
Aluminum carbide preparation
Coke and alumina in electric furnace heating.
Aluminum carbide Al4C3 comes from a combination of two elements at high temperature.
Mixture of one part heavy smoking black and six parts aluminum powder was prepared. It was moistened by pine essential oil and placed in a tight layer inside a clay cup. Finally, it was sealed with toner. All gaps should be filled with refractory earth mixed with asbestos fibers. The mixture was placed into a crucible and pre-dried. For 30 minutes, the mixture was heated to 1200 F. A higher temperature is better for the reaction. After cooling, the product can be treated with dilute chloric acid (or an Alkaline solution) to remove excess aluminium. Aluminum carbide is prepared as fine crystal powder. It is then washed with water to remove any aluminum chloride. Finally, the product is quickly washed and placed in a drying oven at 90 80 degrees for drying. It contains large amounts aluminum nitride.
Pure aluminum carbide is inert, but the products that are made using this process can have different colors from those produced by other impurities.
Pure products can be obtained by adding hydrogen to a mixture of aluminum and smokeblack. This takes about 2 to 3 hours and is done at 1800 1900. The prepared product can be ground again and calcined again at above temperatures
What is the difference between Al4C3 & CAC2?
Answer: Most likely beryllium carbonide [Be2C]; and aluminum carbide[Al4c3]. Beryllium oxide (Be0) reacts with carbon at 2000degC[3600degF] in order to form brick-like Beryllium carbide. While the pale yellow aluminum caride is made from aluminum and carbon in an oven,
(aka. Technology Co. Ltd. (aka. Our company has developed a number of materials. Our company produces aluminum carbide with high purity, fine particle sizes, and low impurities. Send us an e-mail or click the Needed products Send an inquiry

    By admin