Introduction to Zirconium Silicide Zi2 powder
Zirconium silicide
The chemical formula ZrSi2 is zirconium silicide. This is a metallic gray rhombic, glossy crystal with a relative density 4.8822. Zirconium Silicide is insoluble, inorganic acid and aqua regia. However, it is soluble, hydrofluoric acid.
Zirconium siicide ZrSi2 powder’s physicochemical properties
ZrSi2 (zirconium-silicon Intermetallic Compound) is a type of ceramic material with high hardness and high melting points. ZrSi2 can also be used as a structural material or new material, due to its superior physical and chemical characteristics.
Zirconium Silicide ZrSi2 Pulp Properties | |
Other names | zirconium(IV) silicide, zirconium disilicide, ZrSi2 powder |
CAS No. | 12039-90-6 |
Formula compound | ZrSi2 |
Molecular Weight | 147.4 |
Appearance | gray black powder |
Melting Point | N/A |
Boiling Point | N/A |
Density | 4.88g/cm3 |
Solubility of H2O | Insoluble |
Exact Mass | 145.858557 |
Methods of Preparing Zirconium Silicide Zi2 powder
Zirconium silicide is made from a combination of silicon powder, zirconium powder, and high temperatures.
The following steps can be used to make zirconium silicide Nanomaterial.
1. In a 20ml stainless Steel autoclave, add 5mmol zirconia and 5mmol silicon powder. Seal it. Place the autoclave inside an electric furnace with temperature control. The furnace should heat at 600°C. The reaction is allowed to cool to room temperature. After that, open the autoclave to get rid of the product.
2. The reaction products were washed in distilled water. Next, they were washed with anhydrous ethanol and dilute chloric acid, respectively. After each washing, the product was placed in a vacuum drying oven drying for four hours. Zirconium silicide Nanomaterials was prepared based upon the quality of the raw zirconium dioxide used.
Zirconium Silicide Zi2 Powder
ZrSi2 is a fine ceramic raw material powder that can be used to create crucibles, or semiconductor films.
Zr Zirconium can be used in various applications
The production of white pigment impervious agent for surface glazes, and pigments in ceramic and tile industries is one of the most important uses of zircon. The common use of zircon for refractory purposes is in the manufacture and shaping of firebricks, shapes and other materials used in the steel- and glass industries. Zircalite has a high melting temperature (2200) and is used for casting sand to make molds. It is also used for grinding “flour”, especially for warmer applications, where it is important that the castings remain in good condition. The increasing use of zircon is an area of expertise called “investment cast”. Zirconium is used in the manufacture of zirconia, zirconium metallics, and zirconium chemical.
Main Supplier of Zirconium Silicide Zi2 powder
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super high-quality chemicals.
High-quality products are what you want
zirconium silicide ZrSi2 dust
Please feel free and contact us to send an inquiry. (brad@ihpa.net)