If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

What is Calcium Hydride?

The calcium hydride has the chemical formula CaH2 with a molecular number of 42.10. It can be a lump of grayish-white crystals or a white crystal. It is easily deliquescent and used as reducing agent. Also known as a colorless Orthorhombic Crystal, industrial products can be gray, powder or orthorhombic. It is sensitive to moisture. At room temperatures, it will not react with nitrogen or chlorine, but high temperatures can cause the reaction to produce calcium oxide, calciumnitride and calcium chloride. The reaction occurs when the calcium chloride meets water. Also, it can react with ethanol and produce hydrogen as well as calcium ethoxide. The reduction effect of metal oxides on sodium hydride and lithium hydride is much stronger.

Synthesis method for calcium hydride

1. Install the inlet pipe and outlet pipe using rubber plugs at both ends of the quartz tube. Rubber plugs are used at the ends of the quartz tube to install both the inlet and the output pipe. Hydrogen is purified by passing through the inlet, while the outlet pipe goes through the mineral-oil bubbler connected to the fume-hood. An electric furnace is used to warm the reaction tube. After purified hydrogen is introduced, a large quantity of hydrogen is added to the system in order to replace air at the start. This hydrogen was heated by an electric heater. The reaction began at around 200degC. After heating to 250-300degC it was heated further and then hydrogen was introduced with a flow of 0.6ml/min. The reaction is completed in 2 hours. The calcium hydride that is produced is a porous crystalline powder with an off-white color. The calcium hydride has a purity of 99%.

2. Alkaline metal and pure hydrogen electrolysis can be hydrogenated together to produce alkaline metal hydride. CaH2 can be prepared using the same hydrogenation device as alkali metallic hydride. For the purification of metallic calcium it is necessary that you perform vacuum distillation several times, scrape away the oxide layer at the surface and then cut it up as small as you can in an operating box filled with gas argon. When air is removed, the surface will be smooth and free of dust. A boat made from electrolytic iron is used to pack small metal calcium. The boat is then placed in a quartz tube. To protect the quartz tube against corrosion by calcium vapor, the heated part is covered with an electrolytic iron tube. Pure hydrogen is added, then the calcium is warmed to 400-500degC. The hydrogenation reaction begins, and after it has completed the reaction, the temperature of the calcium tube is cooled down to room temperature.

(aka. Technology Co. Ltd., a global supplier of high-quality chemical materials and nanomaterials with more than 12 years experience, is a trusted company. caH2 powder manufactured by our company is high in purity, has fine particles and low impurity levels. If you need lower, please Contact us.

    By admin