If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: email@example.com
A history and overview about praseodymium dioxide powder Praseodymiumoxide (Pr6O11), is an organic compound that can be used for glass and metalurgical purposes. It also serves as a potential phosphor additive. Praseodymium is an important product in the production of light rare Earth products. Due to its exceptional physical and chemical characteristics, it is used extensively in many fields, including ceramics, glass and rare earth permanent magnets. Rare earth cracking catalysts. Rare earth polishing powders. Its prospects look bright. Praseodymiumoxide is a dense black powder that has a density 688 g/cm3. It also has a melting point at 2042 and boiling point at 3760. The substance can dissolve in water but is insoluble in acid. It also has excellent conductivity.
Synthesis of the praseodymium dioxide powder1. Chemical separation. The three main types are step precipitation method, step crystallization method, and oxidation. You can separate the former based on differences in crystal solubility for rare earth nutrate. Separation of the first is based upon the differences in the precipitation product of the rare Earth sulfate dual salt. Separation of the latter takes place by the conversion from trivalent Pr3+ into tetravalent pr4+. Because of the high recovery rate for rare earth and complicated operation, they haven’t been used in industrial production. 2. Separation. This includes complex extraction and the saponification P-507 separation separation methods. To extract and separate praseodymium from the nitric system of praseodymium neodymiumenrichedment, the former employs complex extrusion DYPA, N-263 extractant, and can achieve 99% Pr6O11 and a 98% yield. Due to its complexity, however, it consumes too much complexing agent and has a high cost, making industrial production unviable. They are better at separating praseodymium from the first two and can be used in industrial manufacturing. But, because P-507 is more efficient than P-204 and has a higher loss rate, P-507 extraction methods and separation are commonly used in industrial production. . 3. Although it is difficult to use, slow and has low yield, Ion Exchange is an expensive and time-consuming process.
The application of praseodymium dioxide powder1. Rare earth glass application Different colors can be created by mixing rare earth oxides with glass of different compositions. The glass can then be turned into green color by adding praseodymium to it. It has high artistic value and can be used in imitation of gemstones. The glass appears almost green when lit by candlelight, while it looks similar to normal daylight. This glass can be used for making fake gemstones, precious ornaments, and even love tokens. 2. Rare earth ceramics: Application As an additive to ceramics, rare earth oxides may be transformed into a variety of ceramics that have better performance. Rare earth fine ceramics is a representative example. The ceramics are made from carefully selected materials. They also use easy-to-control and process technology that allows them to precisely control their composition. This can be broken down into functional and high-temperature structure ceramics. These rare earth oxides can enhance the sinterability and microtexture of ceramics by combining them with rare Earth oxides. Praseodymium oxide colourant ceramic glaze is stable and can withstand the effects of the air in the kiln. You can enhance the chemical and physical properties of ceramic glazes, increase their thermal stability, quality, and variety. 3. Other fields of application A grinding wheel made from white corundum is possible by adding approximately 0.25% praseodymium-neodymiumoxide to it. The grinding performance of rare earth corundum wheels will be greatly enhanced. Double the service life and increase the grinding speed by up to 30%. The polishing agent for polishing is Praseodymium Oxide, which has excellent polishing qualities for some materials. The polishing powder is cerium-based and contains approximately 7.5% praseodymium. It’s used mostly for polishing flat glass, TVs and metal products. Picture tube polishing. The application of petroleum cracking catalytic catalysts, which can increase catalytic activities, can be used in steelmaking additives, or purify the molten steel, is also possible. In other words, the use of praseodymiumoxid is always expanding. Eab Tech Co., Ltd. is a professional manufacturer of praseodymium powder. It has over 12 years’ experience in the field. Send us an inquiry if you’re looking for high-quality, high-quality Praseodymium Oxide Powder.