If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Telluride (Cupper(II) Telluride) is a dark powder that is very stable when stored at room temperatures. Particle Size: -80mesh and -100mesh Purity: 99.99% Telluride Copper Copper Te Powder Telluride copper also known as alloys C15400 and C15400 semi-shared tellurium, TECU and Copper tellurium – is a copper-based alloy containing different amounts of tellurium. Tellurium usually has a content of 0.4-0.7%, and phosphorus can be anywhere from 0.004-1.12 percent. Copper tellurium can be described as an alloy made of tellurium, copper and other elements. Copper tellurium containing 0.4-0.7% tellurium has good machinability. The master alloy is telluride copper, which contains half the amount of copper and half the percent tellurium. Tellurium Copper has the following properties: atmospheric corrosion resistance; high temperature and conductivity hydrogen embedment (i.e. caused by the introduction or diffusion of hydrogen fracturing, weaken), 65-130HV hardness; good formability (if free cutting Brass for 100), 85-90% of machinability rating, suitable for welding and brazing. However, it is not suitable to be used for any specific welding process such as resistance welding, oxide-acetylene welding, spot welding, coating metals arc welding, spot welding, spot welding, arc welding, welded, oxygen-acetylene, arc welding, oxylene welding, spec and resetylene wel welding, tylene wel welding, atom-acetylene, he seam welding, spot welding, tylene, tylene wawead It is a copper alloy with excellent machinability and high electrical and thermal conductivity. Copper tellurium alloy is known for having the best cutting performance. It is able to be cast, extruded, drawn, blanked, and molded. The Tellurium copper alloy is available in a wide range of forms, including plate, sheets, rods, wire, tubes, and many other types. Its properties allow it to be used in a wide range of industries. Telluride copper cuTe powder performance: Copper telluride can be described as a chemical substance having the molecular structure CuTe. Copper telluride can be described as a dark powder. It is very stable in ambient air and at room temperatures. Copper telluride, an inorganic mineral that is important for storing copper and tellurium resources, can also be stored as a great way to do so. Cu is used to replace Te in H2SO4 solutions. Copper telluride can be produced by taking out Te and separating tellurium from other metals. It has a very high concentration. Te can either be + 4 or 6 valences in order to replace Cu. This can all produce Cu 2 Te. Tellurium isn’t affected by its valence. Cu telluride, when exposed to an acid or base, can react chemically with these acids and bases. This is the key for seperating and recovering Cu and T. To put it simply, copper and tellurium combine at a higher temperature in order to separate the tellurium.

Telluride copper cuTe powder specification :

Room temperature stable at room temperature, black crystal powder. Copper telluride, an inorganic mineral that is important and stores large amounts of tellurium as well as copper resources, can also be useful. Copper Telluride Certification (ppm) Purity                Zn       Ag    Cu     Al     Mg     Ni     Pb     Sn     Se     Si     Cd     Fe     As     >99.99% ≤5 ≤4 ≤5 ≤3 ≤5 ≤5 ≤5 ≤5 ≤6 ≤4 ≤8 ≤8 ≤5 You can order different products depending on your requirements. How does Telluride Copper CopperCuTe Powder be made? These steps are part of a preparation process for copper tellurium alloys: 1. After mixing high-purity copper and high purity tellurium according the required ratios, or after creating layers of high pure copper and high quality tellurium respectively, they are put in a graphitecrucible. The graphitecrucible is then sealed, after which the protective gas in the graphitecrucible has been replaced with air. 2. The graphite crucible can be placed in a synth furnace. After it is closed, the oxygen from the furnace chamber is transferred into the protective gases. 3. To ensure that the furnace is at 1.04.5MPa, add protective gas. The temperature of the furnace will also rise within the 60-90min, to 12001450. It then drops after 24 hours. 4. The temperature of the synthesis furnace has been lowered to below 100F. After this, the protective gas is removed to bring the pressure to normal. Finally, the furnace can be opened for the copper tellurium alloy ingot. Telluride Copper Copper CuTe Powder – Tellurium copper alloy is used primarily for: High conductivity, high resistance to corrosion of precision electronic parts and electric components, advanced mechanical parts and electrical parts. The tellurium copper alloy is available in a range of profile options, including sheet, plate, rod, wire and tube. Indicators for contact material of charging piles were developed in the wake of the promotion and construction of new energy vehicles. Due to its high electrical qualities and ease of processing, copper tellurium can be successfully used as a high-current connector for new energy vehicle. Packing & Shipping Telluride copper cuTe powder – There are many options for packing depending on Telluride copper cuTe powder. Telluride copper cuTe powder packaging: vacuum packaging, 100g to 500g or 1kg/bag 25kg/barrel and as per your request Shipment of Telluride copper cuTe powder: This could be done by sea, air or express, once the payment has been received.

Cuprous Telluride Pulp Properties

td width=”540″,x:str Cuprous Telluride. Copper (2+) telluride 12019-23-7 CuTe Molecular Weigh 191.15 Appearance Crystalline Melting Point 1125 °C (607 °F) Solubility water N/A Density 7.1 g/cm3 Purity 99.00% -80mesh, -100mesh Boling points N/A Specific Heating N/A Heating Conductivity N/A Thermal Expansion N/A Young’s Module N/A Exact 192.836 Monoisotopic Weight 192.836

Cuprous Telluride Pulp Safety & Health Information

Safety Alert N/A Hazard Statements N/A Flashing points N/A Hazard Codes N/A Risk Codes N/A Security Statements N/A RTECS # N/A Transport Information N/A Germany N/A
Inquiry us

    By admin