If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Antimony telluride has the chemical formula Sb2Te3. It is a topological insulater. Particle Size: -80mesh and -100mesh Purity: 99.99% Antimony Telluride Sb2Te3 Powder: Antimony telluride chemical form Sb2TE3.Molecular Weight 626.30.Gray Solid.Melting Point 639.Relative Density 6.5018. In nitric acids, dissolve. Antimony Telluride is a covalent, ionic, bond that has a particular van der Waals structure, triangular system of crystals, and the original cell, rhombus Hexahedron. Telluride is similar to other alveolar-sulfide layered antimony materials, a grayish crystalline solid that has a multilayered structure. Two atomic antimony, three atomic protein sheets form the layer. The weak van der Waals force holds it together. The topological insulator is also used. It has thickness-dependent physical property. A rhomboid crystal structure is found in Sb2Te3. The crystal material is composed of five covalently bound atoms. These sheets form five atom thick (in order: Te–Sb–Te–Te), which hold the plates together by Van der Waals attraction. Because of its lamellar shape and weak interlamellar force, bulk telluride is easily mechanically separated to remove the monolayers. Sb2Te3’s semiconductor properties have also been examined by Bismuth and Antimony, as well as other binary Cholines. If you are interested in buying bulk Antimony Telluride Sb2Te3 Powder, please send us an inquiry. Antimony Telluride sb2Te3 powder features: Antimony Telluride is an organic compound. The chemical formula for the antimony telluride (Sb2Te3) is The crystal is gray in color. But, its melting point and density may differ depending on what crystal it is. )  

Antimony Telluride sb2Te3 powder specification:

Item
Purity
APS
shape

energy gap

Melting Point
Electric resistivity

Department of Thermoelectric Quality

Tr-Sb2Te3
99.99%-99.9999%
100mesh
Grey crystal
powder,granule,block
0.23eV
620
3×10-6Ω·
0.9×10-3/K
You can order different products depending on your requirements. Technical Parameters of Antimony Telluride – Sb2Te3 powder                         Certificate of Antimony Telluride (%) Purity Cu Mg I In Fe 99.99 ≤5 ppm ≤2 ppm ≤5 ppm ≤5 ppm ≤5 ppm ≤5 ppm ≤5 ppm ≤10 ppm How does Antimony Telluride SB2Te3 () powder be made? Telluride antimony preparation is as follows: using SbCl3 and K2TeO3 as starting materials, according to the stoichiometric ratio of n (SbCl3): n (K2TeO3) = 2:3 said take 0.002 mol SbCl3 and 0.003 mol K2TeO3, 250 ml and join the two round bottom flask, and then add in the 0.5 g polyvinylpyrrolidone, 80 ml 0.5 gNaOH and a reduction of diethylene glycol (take) by the measuring cylinder, put two round bottom flask temperature control heating jacket, set the temperature of 240 ° C, insulation 4 h, adjusting the rotational speed of 500 r/min.After the temperature of the reactants dropped to room temperature, the centrifuge was centrifuged 3 times with isopropyl alcohol and acetone, respectively. At 4000 r/min the speed of the centrifuge was adjusted to 4 min. After centrifugation was completed, the liquid in the top became clear. At room temperature the temperature of reactant is reduced by 100 ml per centrifuge tube. After centrifugation, the centrifugal with isopropanol is centrifuged. The black precipitate was dried in the oven for six hours. Finally, the powder became blackened Sb2Te3. Antimony Telluride sb2Te3 powder Sb2Te3 has been examined in the same way as other binary chalcogenides of bismuth or antimony. By adding the right dopants, it can be made into N- and P-type semiconductors. Comparable to the single frequency detection of pure Sb2Te3, iron doped Sb2Te3 creates many Fermi pockets which results in lower carrier density. The pseudo-binary intermetallic germanium and antimony telluride system is made up of Sb2Te3 as well as germanium telluride, (GeTE). Antimony telluride can be used in solid-state fridges, just like Bi2Te3 and bismuth telluride. This is because it has strong thermoelectric properties. Antimony Telluride Sb2Te3 powder storage conditions: You should keep the reservoir closed and store it in a dry, cool place. Shipping and Packing of Antimony Telluride sb2Te3 powder The amount of Antimony Telluride, Sb2Te3 Powder that we have available will determine the type of packing. Antimony Telluride, Sb2Te3 Powder Packaging: Vacuum Packing, 100g, 500g, 1kg/bag 25kg/barrel and as per your request Antimony Telluride sb2Te3 powder shipping can be shipped by sea or air as soon after receipt of payment.

Antimony Telluride Powder Properties

Antimony(III) Diantimony tritelluride, Antimony(3+) telluride, Antimony sesquitelluride 1327-50-0 Sb2Te3 Molecular Weight 626.32 Appearance Grey Solid Melting Point 580 °C (1076 °F) Solubility water N/A Density 6.5 g/cm3 Purity 99.99% -80mesh, -100mesh Boling points N/A Web Design N/A Heating Conductivity N/A Thermal Expansion N/A Young’s Module N/A Exact 250.810043 Monoisotopic Weight N/A

Antimony Telluride Powder Health & Safety Information

Safety Alert Warning Hazard Statements H302-H332-H411 Flashing points N/A Hazard Codes N/A Risk Codes N/A Security Statements N/A RTECS # N/A Transport Information N/A 3
Inquiry us




    By admin