If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Aluminum silicide also goes by the name aluminum disilicide. Its chemical formula is AlSi2. The powder AlSi2 is often used in powder metallurgy and as brazing solder. Purity: 99% Particle Size: 5-10um Aluminum Silicide AlSi2 Pulver: The aluminum silicon alloy, also known as aluminum-silicon alloy, is an alloy made from forging or casting with silicon and aluminium. The average silicon content is 11 percent. A small amount of copper or iron is also added for strength. It is approximately 2.62.7. It is around 2.62.7 g/cm3. The thermal conductivity of the material is 101126W/(m), Young’s Modulus is 71.0GPa and Impact Value is approximately 78.5J. The fatigue limit is 45MPa. AISi alloys are popular because of their lightweight and good thermal conductivity. The aluminum/silicon alloy forms an binary eutectic with 11.7% of Silicon at 577°C. Intermetallic compounds do not exist. You can add sodium in very small amounts to increase strength, eutectic, and harden the dispersion. Although iron is not a very good choice, it can significantly reduce toughness. However, manganese may be used to mitigate this. Alsi alloy, a key industrial alloy, is very popular. The aluminum silica is used extensively in transportation, aviation, construction, and other major industries. Aluminum silicide is used in the manufacture of low- or medium-strength castings that have complex forms, including cover plates, motor housings and brackets. Brazing solder is also made from racks. It is a typical eutectic alloy with a simplified phase diagram. No intermediate compounds are made. This alloy offers high casting performance, low specific strength, and low prices. It is an element in the third group of elements, with silicon being a semiconductor element. The difference between them is small. To obtain the most current aluminum disilicide prices please contact us. Performance of AlSi2 Aluminum Silicide Powder: Aluminum silicide AlSi2 (powder) is an alloy from silicon and aluminium. The aluminum silicide, which is often in the form powder, is used to make powder metallurgy. Aluminum silicicide is formed at high temperatures into a liquid and then pressed into different products. Technical Parameters of AlSi2 Aluminum Silicide Powder: Product name Purity Particle Size Melting Point Density Silicide AlSi2 99% 5-10um 1400 2.7g/cm3 gray-black Aluminum Silicide AlSi2 powder: AlSi2 Si Fe Ca P 99% 70% balance 0.2% 0.1% 0.02% 0.05% 0.02% How is Aluminum Silicide AlSi2 Pul manufactured? Aluminum-silicon mixture is produced by electrothermal methods at around 2000°C. Alumina and silicon oxide can be reduced during the metallurgical processes to a liquid state. The maximum temperature the submerged arcane furnace can achieve is usually about 1350 2200°C. Products of AlSi2 Aluminum Silicide Powder: The ductility of an aluminum-silicon alloy is best when it has a low silicon content (such 0.7). It is also more malleable and can be used in deformed forms. But, silica content greater than 7% means that the melt of the aluminumsilicon alloy will not fill as well, so it is frequently used to create Cast alloy. When the aluminum-silicon alloys have a silicon content above the Al-Si threshold (silicon content between 12.6% and 14.5%), adding some Ni, Cu, Mg, or other elements to the alloy can increase Its complete mechanical properties. These can be replaced by cast iron cylinders for a significant weight reduction. You can electrochemically treat the aluminum-silicon cylinder to remove the surface aluminum, retain primary silicon dots embedded within the substrate of the cylinder and improve its wear and scratch resistance. Due to its low weight and corrosion resistance, an alloy with between 11%-13% silicon content is one of the top piston materials. 1). Powder metallurgy materials made of aluminum silicide, AlSi2 (powder) are used. The silica at high temperatures is able to form into a molten state, which can then be pressed into many different products. 2). AlSi2 aluminum silica powder is used for the production of weak castings in complex shapes, like bracket, motor shell and cover. 3). As brazing solder, AlSi2 silicide AlSi2 is used. Packing & Shipping of AlSi2 Aluminum Powder: There are many options for packing, which depend on the amount of aluminum silicide (AlSi2) powder. Packaging of aluminum silicide, AlSi2 in powder form: vacuum, 1kg/bag and 25kg/barrel or according to your requirements. Aluminium silicide powder AlSi2 shipping: can be sent by sea or air as soon as the payment receipt has been received. Luoyang Tongrun Nano Technology Co. Ltd. You can contact us for high-quality powder. (brad@ihpa.net)

AlSi2 Powder Properties

AlSi2 aluminum silicon alloy, 11145-27-0 AlSi2 Molecular Weigh N/A Appearance solid Melting Point 600-760 °C Solubility water Insoluble Density 2.7 g/cm3 Purity 99.00% 5-10 um Boling points N/A Specific Heating N/A Heating Conductivity N/A Thermal Expansion N/A Young’s Module N/A Exact N/A Monoisotopic Weight 54.958 g/mol

Aluminium Silicide AlSi2 Safety & Health Information

Safety Alert N/A Hazard Statements N/A Flashing points N/A Hazard Codes N/A Risk Codes N/A Security Statements N/A No. RTECS N/A Transport Information NONH all modes of transportation Germany N/A
Inquiry us

    By admin