What’s Dysprosium Oxide?
Dysprosium Oxide is a chemical substance that has the chemical formula Dy2O3. The white powder is slightly hydrophobic and can absorb water as well as carbon dioxide from the air. Magnesium is stronger than that of high iron oxide. Insoluble in acid and alcohol. Used mainly for lighting.
1. Chemical and physical data
The relative molecular masses of dysprosium dioxide are 373.00 and (d274) 8.81 respectively. The melting point for the material is approximately 234010°C. The boiling point is around 3900°C.
2. Property of physical and chemical substances
Dysprosiumoxide is a white crystal powder. It’s insoluble when water is used, but can be dissolved in acid or ethanol. Exposure to air causes it to absorb carbon dioxide, which turns into dysprosium carbonate.
is the Main Use
Dysprosium dioxide can be used in the production of dysprosium and as an ingredient for glass and neodymium-iron boron magnets. As an additive for permanent magnets made of neodymium iron-boron, dysprosium can be also used. The coercivity of a magnet may be increased by adding about 2 to 3.3% dysprosium. There was a small demand in the past for dysprosium. But with NdFeB, this element is now a necessity. The grade should be between 95-99.9%. And the demand is growing rapidly. Also, dysprosium oxide can be used to make dysprosium metallic, an additive for glass, Neodymium Iron Boron permanent magnets and in magneto-optical memories materials.
Prepare Dysprosium Oxide-Luminescent Material
You will need to weigh the correct amount of Europium Oxide and Dyprosium Oxide powder. After preparing ionic Solution A, heat and stir. Finally, you can add to solution B by heating and stirring. The solution is ready to be used once it’s evaporated at 80°C. You quickly transfer the solution to the corundum container and seal it. The high-temperature resistance furnace can be preheated up to 600°C. Next, place the container containing the precursor solution in the furnace and quickly close the door. Once heated, the precursor solution instantly boils and produces large amounts of heat. It takes approximately 5 minutes to complete the entire process. Once the sample has been removed, it can be cooled to room temperatures.
It is a porous, loosely porous product that has a yellowish-green color. You can grind the product into SrAl2O4;Eu2+ and Dy3+ luminescent material. The initial illuminance is 15lux, with an additional 12h afterglow. Excitation and emission peaks range from 320nm to 365nm. The emission peak is at 510nm. When the particle size is greater than 0.1 micron, then the relative Eu and Dy contents change or the crystal structure is destroyed. The luminous brightness of luminescent particles is decreased or no light is emitted. But if the particle size is larger, it can cause uneven coating films or a sloppy appearance. This test shows that the luminescent dust has a particle size greater than 75mm.
Eab Tech Co., Ltd. is an experienced company in the production and research of chemical products. We are happy to assist you in your search for the best quality Dysprosium Oxide Powder.