Magnesium Silicide is the most stable component in the MgSi binary. It is known for its high melting point and hardness as well as high elastic modulus.
Particle Size: 5-10um
Magnesium Silicide, Mg2Si powder:
Magnesium Silicide is an organic compound that is made up of magnesium and silica. The chemical formula for this inorganic compound is Mg2Si with a molecular weight of 76.71. Cubic crystal in cyan, or light purple. The melting point at 1102 ° C is the relative density 1.94
Magnesium silicide does not dissolve in cold water but will melt in hot. It can be totally decomposed by heating it up to 1200 °C with hydrogen flow. For alkali solution. Hydrogen and silane can be produced by their decomposition. Mg2Si (the only stable compound from the MG–Si binary systems) has a high melt point, high hardness. This makes it a low-elastic material that can be used in semiconductors. The crystal structure shows that each Si atom is in the (0.0, 0.0) position. This creates a facial cubic structure of a long A. The MG atom, located in the (0.25, 0.25, 0.25) location, is found in the middle of the tetrahedron of Si atoms. It forms an unfilial, unfilial structure at A / 2. Magnesium Silicide is a thin-gap semiconductor. Magnesium silicide, which is a semiconductor with a small gap, grows crystals that exhibit n-type conductivity. However, it can also be doped with Ag, Ga and Sn to increase its doping level.
Magnesium Silicide Si powder:
Magnesium silicide (CAS 22833-39-6) powder has a high melting temperature, high corrosion resistance.
Technical Parameters of Magnesium Siicide Mg2Si Pulp:
Magnesium Silicide Mg2Si Pulp:
How does Magnesium Silicide Magnesium Sg2Si powder get made?
Silica powder has a particle size of 180. Magnesium powder is 100g. Research has revealed that silica magnesium reacts at 600 °C for 4 hours. The reaction rate is 2.02 Si: 1. Cooling rate is 10 °C per min. Product quality is excellent with a magnesium silicide concentration of over 98%.
Magnesium Silicide Silicide ?
Magnesium Silicide is used often to create aluminum alloys. This contains around 1.5% magnesium sulicide.
To produce 6000 series aluminum alloys, Magnesium silicide can be used. It contains up to 1.5% of Mg2Si. It is possible to harden the alloy of this group and create the Guinier PRESTON zone or a very fine precipitate. This will increase the alloy’s strength.
The principal electronic use of MG2Si’s MG2Si can be found in its thermoelectric generator.
Magnesium silicide primarily is used for the production of other silicides.
It is used for the production of MgSin2 powder. It is useful in the production of non-oxide clay powder.
An by-product of silicide magnesium silicide
Shipping and Packing of Magnesium Silicide, Mg2Si Pulp:
There are many packing options available that depend on the amount of magnesium silicide, Mg2Si.
Magnesium silicide Si powder packaging: vacuum Packing, 1kg/bag 25kg/barrel or as required
Magnesium silicide Si powder shipping: Could be shipped by sea, air or express once payment receipt has been received.
Magnesium Silicide Properties
dimagnesium silicide, dimagnesium monisilicide,
MgSi, Mg2Si powder
Magnesium Silicide Security & Health Information