If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

What is ultrafine PTFE?

Ultra-fine polytetrafluoroethylene (PTFE) powder is a white, low-molecular-weight, free-flowing powder with stable molecular structure, excellent chemical resistance (resistance to strong acids and alkalis), good electrical insulation, and extremely high flame retardancy Performance, excellent self-lubricity, high weather resistance, aging resistance, good UV resistance, scratch resistance, scratch resistance, good hand feeling, good gloss, good thermal stability, wide temperature range ( -200- +300), and has good non-stick properties and recoatability. After the special surface treatment, the polytetrafluoroethylene (PTFE) powder not only maintains the original excellent properties of PTFE, but also has many unique properties: such as good dispersibility, good compatibility, no self-aggregation, no static electricity Effectiveness, high self-lubricity, reduced friction coefficient, etc.

Due to its high hardness, ultra-fine powder PTFE has excellent scratch resistance and antiabrasion properties. Resistance to metal scratching. Technical index: Item Index parameter: Content 99.9% Bulk densities (kg/L), 0.5 Appearance White liquid powder Average particle sizes (um), 2-5um Melting points () >=326

Use of ultrafine PTFE Powder

Useful in a variety of coatings based on solvents or powders. Examples include plastic coatings; wood paints; coil coatings; light-curable coats. It can be used as a solid instead of liquid lubricant. You can use it to improve the fluidity in the ink. As a wear agent, it’s usually added at 1-3wt%. The coating can also be non-stick. The usual amount added is not greater than 5wt%. The organic solvent can also be used for a release agent. It can also act as a highly effective anti-drip agent for various plastics, such as the environmentally friendly flame retardants polycarbonate (PC), Polyurethane(PU) and Polystyrene(PS).

The recommended dosage ranges from 0.1-5.0%. The additive is added to the process at the very beginning. For the best results, it is necessary to stir at high speed. To avoid affecting its performance, it is best to not use a sand or three-rolls mill. If needed, the organic solvent can be pre-dispersed and added as a liquid slurry to improve its performance.

(aka. Technology Co. Ltd., a trusted global chemical materials supplier & manufacture with more than 12 years experience in providing high quality nanomaterials and chemicals. Our powder is of high purity with a fine particle size. If you need lower, please Contact us.

    By admin