If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The following is a brief overview of the Overview The following are some examples of how to use лородоулс Cuprous oxide (Cu2O) is monovalent, copper oxide. It’s a bright red powder, solid and almost insoluble when mixed with water. It disproportionates in acidic solutions into copper, copper elemental. When exposed to moist air, it gradually oxidizes into black copper dioxide. Cuprous oxide, the chemical formula is Cu2O, is monovalent copper oxide, a bright red powder solid, almost insoluble in water, in acidic solution disproportionation into copper and copper elemental, in the wet air gradually oxidized into black copper oxide.
It is more than twice as much copper in an acidic liquid, which indicates that copper ions have a greater stability in the solution. Cuprous oxide, for instance, reacts to form copper sulfate when it is combined with sulfuric acid.
Cu2O+ H2SO4 = CuSO4+ Cu + H2O
Cuprous oxide is formed when nitric and cupric acid react to produce copper nitrate.
3Cu2O + 14HNO3(dilute)- 6Cu(NO3)2 + 2NO| + 7H2O
Cuprous oxide forms complexes when ammonia water or hydrogen halide acids are added. It does not decompose into copper divalent and copper
Solvable in concentrated ammonia to form the colorless [Cu(NH3)2]+ complex (copper ion (I)). This is oxidized to blue [Cu[NH3)4(H2O2)2]2+ hydrate ammonia (copper ii) in the air.
Curious oxide is also soluble with sulfuric or nitric acid, forming copper sulfate or copper nitrate.
What is cuprous oxide used for?
As a ceramic pigment, cuprous oxide can be used to produce glazes that are blue, red, and green.
Also, it was mistakenly added to animal feed as a nutritional supplement.
Copper absorbable is minimal due to low biological activity. Copper alloys are also used in its welding. Ship bottom antifouling (to kill lower Marine creatures) is made with cuprous oxide.
It is used as a bactericide. Also, it can be used for the production of copper salts. Cuprous oxide is commonly used in organic synthesis as a catalyst.

Is cuprous oxide dangerous?
It is toxic when swallowed. Absorption through the skin can cause harm. May cause skin irritation. It may cause irritation of the eyes.
Acute toxicity LD50 470mg/kg mice. LD50 for the abdominal meridian in mice is 380mg/kg. After a few days, the body’s temperature will return to normal. However, symptoms such as weakness, headache, dizziness rapid pulse count and lymphocytosis may persist. Gastric lavage using a K4[FeCN]6 solution at a certain concentration, milk consumption and other measures are taken to treat acutely-infected patients. The maximum allowed concentration in the atmosphere is 0.1mg/m3. You can use a dust-proof mask, protective clothing, and dust-proof eyeglasses.
Chronic poisoning can be seen in the form of a darker reddish-purple edge to the gingiva, the hair and skin of workers exposed to copper compounds. The dust is irritating to skin, and it irritates eyes causing corneal ulcers.
What is the difference in CuO and Cu2O?
Cu2O may be produced by oxidizing a copper metal or reducing a copper (II,) solution with sulfur oxide. CuO is produced by the pyrometallurgical method used to extract ore copper. Copper is the main ingredient in many wood preservatives. Copper can also be used to color different glazes.

How is cuprous oxid formed?
In the normal direct oxidation process of metal Copper, platinum wire is suspended inside the vertical tubular electric oven in a nitrogen atmosphere with 1%(volume fractions) oxygen. It is heated to 1000 degrees for 24 hours in order to produce cuprous oxide. Or, the chemical calculation is done by closing a copper oxide mixture and metal copper in a vacuum chamber. It’s heated at 1000 degrees for 5 hours to produce cuprous dioxide. The order in which the oxide phase is formed from copper by thermal oxidation goes as follows: Cu + Cu + Cu2O +Cu2O +Cu2O +CuO +CuO. Cu2O can be formed at around 200degC. CuO starts to form at 300degC.
The dry process is also a way to make cuprous oxide.
Dry method: The copper is first mixed with copper dioxide, then heated in the calcining kiln to 800-900degC. It will be converted into cuprous oxide. Then, pulverize the material to 325 mesh after removing mechanical impurities with a magnet. Use an iron to reduce copper sulfate if it is the raw material. The reactions are the same for the copper powder method.

Why is the cuprous oxide red in color?
It is reduced from the black copper oxide. It will remain in its Cu2O form if reduced and sintered to give the typical copper-red colour.
Aminopolysiloxane: Cu2O Photocathode overlayer: Photocorrosion inhibitor and Low Overpotential Co2-to-formate Selecivity Promoter
Photoactive Ptype semiconductors based on Earth-rich element represent photoactive Ptype semiconductors of photoelectrochemical reduction reaction CO2 (PEC CO2RR). Under PEC CO2RR, the photocorrosion occurs despite light absorption, appropriate conduction energy and a high level of surface energy. Here, aminefunctionalized Polysiloxane(AF-PSI), is evaluated using the amineCO2 adduct. AF-PSI is also evaluated as a PECCE2RR promoter. Electrochemical tests and X-ray diffraction have shown that AFPSI coatings improve light stability. The feed efficiency in electrolysis tests under visible light illumination was 61%. In situ FTIR analyses have revealed that CO2 and amine combine to form a urethane. This method confirms the double-effect of the AFPSI layer due to the cathode polarization.

(aka. Technology Co. Ltd., a reputable global chemical supplier & manufacturer has been in business for over 12 year providing high-quality Nanomaterials and chemicals. Currently, we have successfully developed a number of materials. Our Cuprous oxide Cu2O is a powder with high purity, small particles and low impurities. Send us an e-mail or click the desired products to send a request.

    By admin